Event Settings

Event Settings

Any event trigger can be configured to send an email to the appropriate personnel in case of an abnormal event.

There are two types of Notifications:

• Desktop : Notifications will be posted in the Notification area (refer Dashboard and Notification)

• Email : Notifications will be sent to the email recipients specified in Email Configuration

Email

An example of the configuration for Event Settings for Processor Activity

---

Enable Event Notifications

To configure event settings:

1

Select event to be set by clicking drop-down list.

2

Check the box to enable notification on the desktop or email. Then, click 'Save Changes'.

3

The example below will send a desktop notification and an email to the user if memory usage exceeds the threshold limit. The user will also be notified when memory usage returns to a normal state.

Example of notification settings for Memory Activity

---

List of Events

Processor Activity

1. CPU activity above limit

2. CPU activity back to normal

Memory Activity

1. Memory activity above limit

2. Memory activity back to normal

Network Activity

1. Network send activity above limit

2. Network send activity back to normal

3. Network receive activity below limit

4. Network receive activity back to normal

5. Network cable plugged

6. Network cable unplugged

7. Network available

8. etwork unavailable

9. Network teaming enabled

10. Network teaming disabled

Disk Activity

1. Disk read activity above limit

2. Disk read activity back to normal

3. Disk write activity below limit

4. Disk write activity back to normal

System Monitor

1. High CPU temperature

2. CPU temperature back to normal

3. High system temperature

4. System temperature back to normal

5. CPU fan speed below limit

6. CPU fan speed back to normal

7. System fan speed below limit

8. System fan speed back to normal

9. 3V3 system above limit

10. 3V3 system back to normal

11. 3V3 system below limit

12. 3V3 system back to normal

13. 12V system above limit

14. 12V system back to normal

15. 12V system below limit

16. 12V system back to normal

17. Mainboard battery Low

18. Mainboard battery back to normal

Session Shield

1. Session Shield at warning state

2. Session Shield at critical state

3. Session Shield back to normal

4. Session Shield rebooting system

Virtual Security Key

1. Virtual security key added

2. Virtual security key deleted

Security Key

1. Security key added

2. Security key deleted

3. Security key renamed

Support

1. Remote support enabled

2. Remote support disabled

3. Remote support setup successful

4. Remote support setup failed

Disk Guard

1. Disk removed

2. Disk remove acknowledged

3. Disk inserted

4. New disk

5. Disk replaced

6. Disk replace acknowledged

7. Disk online

8. Disk offline

9. Disks changed

Disk Health

1. Disk health warning

2. Disk health critical

Redundant Storage System

1. Storage pool status is healthy

2. Storage pool status is warning

3. Storage pool status is unhealthy

4. Virtual disk status is healthy

5. Virtual disk status is warning

6. Virtual disk status is unhealthy

7. Physical disk status is healthy

8. Physical disk status is warning

9. Physical disk status is unhealthy

Device Monitor

1. Monitor status changed aggregate

2. Monitor down reminder aggregate

Recording Monitor

1. Camera recording event aggregate

Central Agent

1. ecaCentral registered

2. ecaCentral unregistered

3. ecaCentral connected

4. ecaCentral connect failed