Disk Guard

Display status all connected hard disk to the ECA.

HDD stores important video evidence data. It is important to ensure the data remains intact in the ECA. Disk Guard monitors HDD insertion and removal events on the ECA.

Disk list shown depending on the ECA model:

· ECA-FX44: System Disk, Bay 1 – Bay 15

· ECA-EX44: System Disk, Bay 1 – Bay 10 & HD1

· ECA-DX44: System Disk, Bay 1 – Bay 5, HDD1, HDD 2

· ECA-MX44: System Disk, HDD1, HDD 2

· ECA-VW44: System Disk, HDD1, HDD 2

Status:

· Online: Hard disk installed. Using by OS

· Offline: Hard disk installed. Not using by OS

· No Disk: No hard disk installed.

· Removed: Previous hard disk has been removed.

· Replaced: Hard disk has been replaced with different serial number.

NOTE:

· System Disk is the drive containing operating system.

· Hard disks insert in the hotswap bay will label shows as a ‘Bay’.

· Internal hard disk will label HDD1 & HDD2 is for the internal hard disk.

· When hard disk removed, the hard disk information still shown with ‘Removed’ status. Acknowledge the removed hard disk will change to latest status.

· For email and notification setting, go to Events

· Example email of the Disk Guard event in the Appendix Disk Guard

Hard disk cange during ECA Power Off

Dashboard will be sending notification via email to inform there is hard disk changing during ECA off stage (power off). This feature is part of Disk Guard, to protect the Data/Evidence, ensure the same serial number was in the ECA machine before and after power on.